High-lifter Arched Rear Lower Control Arms for Polaris Ranger User Manual download pdf (Page 3)

Installation Instructions:

1. Place jack under center of Ranger rear end and lift until rear wheels clear the

ground. Be careful to support the UTV properly so that it is securely supported

but so that A-arms and shocks can droop to full extension.

2. Remove rear wheels.

3. Remove both rear lower A-arms from the UTV.

Disconnect the lower hub assembly from the lower control arm

Disconnect the shock from the shock mount

Disconnect the lower control arm from the frame

4. Remove the bushings and sleeves from the stock control arms. You will need to

reuse these in the new lower arched a-arm kit.

1 2 3 4

No comments

High-lifter Arched Rear Lower Control Arms for Polaris Ranger User Manual Page 3