High-lifter DynoJet Jet Kit for Kawasaki Prairie 400 (99-01) User Manual download pdf (Page 2)

1. Remove vacuum slide from carb. Remove stock needle & spacers, noting order of assembly.

2. Install Dynojet needle on groove# 4 for applications below 5000 feet, groove #3 for above 5000 feet, using all stock spacers. Install the Dynojet

washers above the E-clip.

3. Remove stock main jet and replace with Dynojet main provided. If you are running the stock exhaust use the DJ138 below 3000 feet, DJ134 from

3000 to 6000 feet and DJ130 above 6000 feet. If you are running an aftermarket exhaust with a HIGH flow baffle use the DJ142 below 3000 feet,

DJ138 3000 to 6000 feet and the DJ134 above 6000 feet. Be sure that the jet you are changing is the main jet.

4. Locate the Fuel Mixture Screw. Using a flat blade screwdriver, turn the mixture screw clockwise until it seats, then turn out 3.5 turns .

STAGE ONE INSTRUCTIONS

This is Groove #1.

Q209.001

Fig. A

Fig. B

Fuel Mixture Screw

1 2

No comments

High-lifter DynoJet Jet Kit for Kawasaki Prairie 400 (99-01) User Manual Page 2