High-lifter Lift Kit for Honda 300 4x4 (98-02) User Manual download pdf

High Lifter Products, Inc. Phone 318-524-2270

780 N Professional Dr Fax 318-524-2297

Shreveport, LA 71105 www.highlifter.com

Honda 300 2x4 Lift Kit Installation Instructions

Read Before Installation!

This product is designed for use on ATVs on which additional ground clearance and fender clearance is

desired. It is designed for utility type, slower-speed use on relatively flat terrain in deep mud or snow.

Although we have many thousands of satisfied lift kit customers and over 400 franchised dealers

selling and installing lift kits, purchasers should be aware that use of this product may increase the

frequency of required maintenance, part wear, and will raise the center of gravity on your ATV

increasing risk of roll-over on side hills, ditches or other steep terrain.

We recommend that wider tires and/or wheel spacers be used to achieve a wider stance and to improve

stability of the ATV. Riders should be advised that the handling characteristics of a taller ATV are

different and require extra care when riding on side hills or off-camber situations. If you further raise

the center of gravity by adding heavy loads to racks or seats, the ATV must be operated with care, at

slower speeds or on relatively flat ground.

Operation of an ATV with or without a lift kit, while or shortly after consuming alcohol or drugs,

subjects the rider to the risk of serious bodily harm or possible death. This is compounded if the rider

does not wear an approved helmet and other safety gear. High Lifter urges that all approved safety

gear be worn when riding an ATV.

If this is not what you expected, or is not consistent with your intended use, you should return the

product immediately to the seller, before installation, for a refund of the purchase price; less any fees.

After installation, product is warranted for 90 days for defects in workmanship and materials.

Warranty is limited to refund of the purchase price or replacement of the kit, at the seller’s option.

1 2 3 4 5 6

High Lifter Products, Inc. Phone 318-524-2270 780 N Professional Dr Fax 318-524-2297 Shreveport, LA 71105 www.highlifter.com

Parts Diagram Front Lift 1. Place jack under center of ATV front end and lift until front wheels clear the ground. Be careful to support ATV p

Page 3

4. Now insert the 10 x 60 hex bolt and loosely secure the bracket to the frame with the 10mm Locknut. 5. Slide bottom of shock into top of lift b

Page 4

7. Next place the support bracket on the outside of the Front Lift Bracket. Make sure that it is on the side that faces the rear of the ATV and sec

Page 5

Rear Lift 1) Place jack under ATV at the rear of the bottom skid plate and lift until the weight is off of the suspension. Be careful to secure the

6) Attach the rear support bracket to the brake housing using the 8mm washer and 8x35 hex head bolt. 7) Lower and remove jack. Check for c

No comments

High-lifter Lift Kit for Honda 300 4x4 (98-02) User Manual