High-lifter DynoJet Jet Kit for Kawasaki KFX 700 V-Force (03-0 User Manual download pdf (Page 2)

STAGE ONE INSTRUCTIONS

1. Remove vacuum slides from carbs. Remove stock needles & spacers, noting order of assembly (Fig.A).

2. Install Dynojet needles on groove #5 for applications below 5000 feet, groove #4 for above 5000 feet,

using all stock spacers. Install the Dynojet washers above the E-clip, 2 per needle (Fig.A).

3. Remove stock main jets and replace with Dynojet main jets provided. Use the DJ120 in the front carb and

the DJ124 in the rear carb below 3000 feet, DJ118 in the front carb and the DJ122 in the rear carb from 3000

to 6000 feet and DJ116 in the front carb and the DJ120 in the rear carb above 6000 feet. When using an

aftermarket exhaust with a high flow baffle, use the DJ124 in the front carb and the DJ128 in the rear carb

below 3000 feet, DJ122 in the front carb and the DJ126 in the rear carb from 3000 to 6000 feet and the

DJ120 in the front carb and the DJ124 in the rear carb above 6000 feet.

4. Locate the Fuel Mixture Screws (Fig.B). Using a flat blade screwdriver, turn the mixture screws clockwise

until seated, then turn out 2.5 turns, 2 turns above 5000 feet.

Fig.A

Q214.001

This is Groove # 1

Fig.B

Mixture Screw

Dynojet Parts

1 2

No comments

High-lifter DynoJet Jet Kit for Kawasaki KFX 700 V-Force (03-0 User Manual Page 2